publications
main content
Articles
- Adhesion, atomic structure and bonding variation in TiN/VN interface by chemical segregations
- Deqiang Yin, Peng Xianghe, Qin Yi, Wang Zhongchang,
Surface and Interface Analysis (2012)
http://dx.doi.org/10.1002/sia.4998 - New technique for determining the critical loads of a thin coating on a tool–steel substrate by considering the initiation of cracks in the coating
- Feng Jiling, Qin Yi, Raghavan Rejin, Michler J, Almandoz E., Fuentes G.G.,
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Vol 226, No. 7, pp. 1205-1212 (2012)
http://dx.doi.org/10.1177/0954405412442778 - Impact of residual stress on adhesion and tensile fracture of TiN/CrN multilayered coatings from first principles
- Deqiang Yin, Peng Xianghe, Qin Yi, Wang Zhongchang,
Physica E: Low-dimensional Systems and Nanostructures Vol 44, No. 9, pp. 1838-1845 (2012)
http://dx.doi.org/10.1016/j.physe.2012.05.008 - Dynamics characteristics of a micro-sheet-forming machine system
- Qin Yi, Razali Akhtar Razul, Zhou Mei, Zhao Jie, Harrison Colin, Wan Nawang Wan Adlan,
Key Engineering Materials Vol 504-506, pp. 599-604 (2012)
http://dx.doi.org/10.4028/www.scientific.net/KEM.504-506.599 - Quantifying adhesion energy of mechanical coatings at atomistic scale
- Yin Deqiang, Peng Xianghe, Qin Yi, Feng Jiling, Wang Zhongchang,
Applied Surface Science Vol 258, No. 4, pp. 1451–1455 (2011)
http://dx.doi.org/10.1016/j.apsusc.2011.09.102 - Development of a new high-precision feeder for micro-sheet-forming
- Razali Akhtar, Qin Yi, Zhao Jie, Harrison Colin, Smith R.,
Journal of Manufacturing Science and Engineering Vol 133, No. 6, (2011)
http://dx.doi.org/10.1115/1.4005046 - Nano-wear, nano-hardness and corrosion-resistance of electroplated nickel surfaces after co-implantation of Cr+ and N-2(+) ions
- Conde A., Munoz-Garcia C., Garcia I., Fuentes G. G., Almandoz E., Garcia J. A., Rodriguez R. J., Qin Y.,
Surface and Coatings Technology Vol 205, No. 19, pp. 4447-4452 (2011)
http://dx.doi.org/10.1016/j.surfcoat.2011.03.069 - Prediction of residual stress in multilayered coatings with a linearly elastic model incorporating density functional theory calculations
- Deqiang Yin, Peng Xianghe, Qin Yi, Wang Zhongchang,
Journal of Multiscale Modelling Vol 3, No. 1-2, pp. 65-78 (2011)
http://dx.doi.org/10.1142/S1756973711000352 - A six-node triangle finite volume method for solids with a rotational degree of freedom
- Pan Wenke, Wheel Marcus, Qin Yi,
Computers and Structures Vol 88, No. 23-24, pp. 1506-1511 (2010)
http://dx.doi.org/10.1016/j.compstruc.2010.08.001 - Micro-sheet-forming and case studies
- Zhao Jie, Brockett Andrew, Razali Akhtar, Qin Yi, Harrison Colin, Ma Y.,
Steel Research International Vol 81, No. 9, pp. 1185-1188 (2010)
http://dx.doi.org/10.1002/srin.201190002 - Micro-manufacturing : Research, technology outcomes and development issues
- Qin Y., Brockett A., Ma Y., Razali Akhtar, Zhao J., Harrison C.S., Pan W., Dai X., Loziak D.,
International Journal of Advanced Manufacturing Technology Vol 47, No. 9-12, pp. 821-837 (2010)
http://dx.doi.org/10.1007/s00170-009-2411-2 - MASMICRO micro-/nano-materials processing, analysis, inspection and materials knowledge management
- Chronakis Ioannis S., Mekras Nikolaos D., Wiesauer Karin, Breuer Eva, Stifter David, Fuentes Gonzalo F., Qin Yi,
International Journal of Advanced Manufacturing Technology Vol 47, No. 9-12, pp. 963-971 (2010)
http://dx.doi.org/10.1007/s00170-009-2126-4 - Finite-element and experimental analysis of dynamic behaviours of a micro-stamping tool system
- Zhou M., Qin Y., Harrison C.S., Brockett A., Ma Y.,
International Journal of Advanced Manufacturing Technology Vol 47, No. 9-12, pp. 839-844 (2010)
http://dx.doi.org/10.1007/s00170-009-2138-0 - A knowledge-based design advisory system for collaborative design for micromanufacturing
- Dai X., Qin Yi, Ma L., Juster N.,
International Journal of Advanced Manufacturing Technology (2009)
http://dx.doi.org/10.1007/s00170-009-2136-2 - Design considerations for developing a new, ultra-high precision feeder for micro-sheet-forming applications
- Razali Akhtar, Qin Yi, Harrison Colin, Brockett Andrew,
International Journal of Nanomanufacturing Vol 3, No. 1-2, pp. 40-54 (2009)
http://dx.doi.org/10.1504/IJNM.2009.027050 - CrCN cathodic arc PVD coatings
- Fuentes G.G., Diaz de Cerio M.J., Garcia Alvarez Joaquin, Martinez R., Bueno R, Rodriguez R.J, Rico M, Montala F, Qin Yi,
Thin Solid Films Vol 517, No. 20, pp. 5894-5899 (2009)
http://dx.doi.org/10.1016/j.tsf.2008.08.005 - Temperature-dependent contact phenomena of PVD- and CVD-deposited DLC films sliding on the thin aluminium foil
- Qin Yi, Díaz de Cerio M.J., Fuentes G.G., Martínez R., Rodriguez R., Spain E., Housden J., Hörnig W.,
International Journal of Advanced Manufacturing Technology (2009)
http://dx.doi.org/10.1007/s00170-009-2130-8 - Study on optimization of isothermal forging process of Ti alloys
- Ding P.P., Yang Y., Qin Yi, Liu J., Yao W.X.,
Forging and Stamping Technology Vol 34, No. 3, pp. 121-123 (2009)
http://dx.doi.org/CNKI:SUN:DYJE.0.2009-03-040 - Gradient Cr(C,N) cathodic arc PVD coatings
- Fuentes G.G., Díaz de Cerio M.J., García J.A., Martínez R., Bueno R., Rodríguez R.J., Rico M., Montalá F., Qin Yi,
Surface and Coatings Technology Vol 203, No. 5-7, pp. 670-674 (2008)
http://dx.doi.org/10.1016/j.surfcoat.2008.08.079 - A coupled thermal-mechanical analysis of a mould-billet system during continuous casting
- Qin Yi, Zhou J., Peng X.,
International Journal of Advanced Manufacturing Technology Vol 42, No. 5-6, pp. 421-428 (2008)
http://dx.doi.org/10.1007/s00170-008-1620-4 - Feasibility study and tool design of using shape memory alloy as tool-structural-elements for forming-error compensation in micro-forming
- Pan W., Qin Yi, Law F., Ma Y., Brockett A., Juster N.P.,
International Journal of Advanced Manufacturing Technology Vol 38, No. 3-4, pp. 393-401 (2008)
http://dx.doi.org/10.1007/s00170-007-1339-7 - FE analysis of multi-cycle micro-forming through using closed-die upsetting models and forward extrusion models
- Pan W., Qin Y.,
Journal of Materials Processing Technology Vol 201, No. 1-3, pp. 220-225 (2008)
http://dx.doi.org/10.1016/j.jmatprotec.2007.11.170 - A web-based collaborative design advisory system for micro-product design assessment
- Dai Xiaojun, Qin Yi, Juster Neal,
Applied Mechanics and Materials Vol 10-12, pp. 220-224 (2007)
http://dx.doi.org/10.4028/www.scientific.net/AMM.10-12.220 - A numerical investigation to the strategies of the localised heating for micro-part stamping
- Peng X., Qin Y., Balendra R.,
International Journal of Mechanical Sciences Vol 49, No. 3, pp. 379-391 (2006)
http://dx.doi.org/10.1016/j.ijmecsci.2006.08.009 - Upper-bound analysis of pressure-assisted injection forging of thick-walled tubular components
- Ma Yanling, Qin Yi, Balendra R.,
International Journal of Mechanical Sciences Vol 48, No. 10, pp. 1172-1185 (2006)
http://dx.doi.org/10.1016/j.ijmecsci.2006.05.001 - Micro-forming and miniature manufacturing systems: development needs and perspectives
- Qin Yi,
Journal of Materials Processing Technology Vol 177, No. 1-3, pp. 8-18 (2006)
http://dx.doi.org/10.1016/J.Jmatprotec.2006.03.212 - Forming-tool design innovation and intelligent tool-structure/system concepts
- Qin Yi,
International Journal of Machine Tools and Manufacture Vol 46, No. 11, pp. 1253-1260 (2006)
http://dx.doi.org/10.1016/j.ijmachtools.2006.01.013 - Mechanics of pressure-assisted injection forging of tubular components
- Qin Y., Ma Y., Balendra R.,
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Vol 218, No. 10, pp. 1195-1212 (2004)
http://dx.doi.org/10.1243/0954406042369125 - Optimisation of the lubrication for the extrusion of solid and tubular components by injection forging
- Qin Y., Balendra R.,
Journal of Materials Processing Technology Vol 135, No. 2-3, pp. 219-227 (2003)
http://dx.doi.org/10.1016/S0924-0136(02)00899-3 - FE analysis of springback and secondary yielding effect during forward extrusion
- Peng X., Qin Y., Balendra R.,
Journal of Materials Processing Technology Vol 135, No. 2-3, pp. 211-218 (2003)
http://dx.doi.org/10.1016/S0924-0136(02)00898-1 - Concept of a design support system for form comparison
- Qin Y., Balendra R.,
Journal of Materials Processing Technology Vol 115, No. 2, pp. 245-255 (2001)
http://dx.doi.org/10.1016/S0924-0136(01)00818-4
Book Sections
- Towards a dynamically generated product configurator that reflects the available manufacturing capability
- Yip Arthur Lan Kuan, Jagadeesan Ananda Prasanna, Qin Yi, Corney Jonathan,
In : Advances in Manufacturing Technology XXVI Vol 1, pp. 164-169 (2012)
- A front-end system to support cloud-based manufacturing of customised products
- Yip Arthur Lan Kuan, Jagadeesan Ananda Prasanna, Corney Jonathan, Qin Yi, Rauschecker Ursula,
In : Advances in Manufacturing Technology XXV pp. 193-199 (2011)
Conference Items
- Hot-embossing of polymeric micro-tubes
- Zhao Jie, Qin Yi, Razali Akhtar, Yip Arthur Lan Kuan, Fei Zhicong,
7th International Conference on MicroManufacturing (2012)
- Development of a front-end system for customised product specification in the ManuCloud
- Yip Arthur Lan Kuan, Jagadeesan Ananda Prasanna, Corney Jonathan, Qin Yi,
The 22nd International Conference on Computer-Aided Production Engineering (CAPE2011) (2011)
- FE simulation of sheet-metal feeding in micro-forming
- Razali Akhtar, Qin Yi,
21st International Computer-Aided Production Engineering Conference (CAPE 2010) (2010)
- Optimisation of the performance of a linear motor driven feeder for micro-sheet-forming applications
- Razali Akhtar, Qin Yi, Zhao Jie, Yip Arthur Lan Kuan, Harrison Colin,
8th International Conference on Manufacturing Research ICMR 2010 (2010)
- Development of a linear-motor-driven feeder for micro-sheet-forming applications
- Razali Akhtar, Qin Yi, Zhao Jie, Harrison Colin,
International Conference on Manufacturing Research 2009 (2009)
- Investigation of feeding devices and development of design considerations for a new feeder for micro-sheet forming
- Razali Akhtar, Qin Yi, Harrison Colin, Brockett Andrew,
6th International Conference on Manufacturing Research, ICMR 08 (2008)
- Development of a new machine system for the forming of micro-sheet-products
- Qin Y., Ma Y., Harrison C.S., Brockett A., Zhou M., Zhao J.,
11th ESAFORM 2008 Conference on Material Forming (2008)
http://esaform2008.insa-lyon.fr/proceedings/MS08/p_Qi_399.pdf - Investigation of dynamical behaviours of a micro-stamping tool
- Zhou M., Qin Y., Ma Y., Harrison C.S.,
5th International Conference on Manufacturing Research (2007)
- Process and machine system development for the forming of miniature/micro sheet metal products
- Qin Y., Harrison C.S., Ma Y., Brockett A., Juster N., Uriarte L., Cuevas A., Eguia J.,
7th Euspen International Conference (2007)
