
Mr Elangovan Parameswaran
Hot Sheet Forming Theme Lead
Advanced Forming Research Centre
Back to staff profile
Publications
- Environmental impact assessment and comparative analysis of hot stamping and cold stamping processes : a cradle-to-gate lifecycle assessment study
- Bucconi Marco, Karkasinas Aineias, Liu Jun, Parameswaran Elangovan
- 20th International Conference on Metal Forming 2024 (2024)
- AFRC-TRP02280-DIRF06194-D4.1-Final Report
- Bucconi Marco, ElRakayby Hosam, Gonzalez Diego, Parameswaran Elangovan
- (2023)
- AFRC-TRP02280-DIRF06194-D4.1-Final Report V1.0
- Knowles Craig, Bucconi Marco, Parameswaran Elangovan, Gonzalez Diego, ElRakayby Hosam
- (2023)
- Presentation Describing the Implemented DB Methodology and the Outcomes of the 9 Verification Trials
- Allazadeh Mohammad, Parameswaran Elangovan, Soundattikar Yogesh
- (2023)
- AFRC-PRS02281-DIRF6194-D2.2-V1.0
- Knowles Craig, Gonzalez Diego, Parameswaran Elangovan, Bucconi Marco, ElRakayby Hosam
- (2022)
- AFRC-PRS02267-DIRF06194-D3.3-V1.0
- Knowles Craig, Bucconi Marco, Parameswaran Elangovan, Gonzalez Diego, ElRakayby Hosam
- (2022)
Back to staff profile
Projects
- NMIS-CATX 06291 Measuring the impact of near net shape manufacturing processing on CO2 emissions
- Bucconi, Marco (Principal Investigator) Karkasinas, Aineias (Principal Investigator) Parameswaran, Elangovan (Co-investigator) Liu, Jun (Co-investigator)
- Assessment of the impact of two near net shape manufacturing processes in the production of CO2 emissions for a demonstrator part
- 20-Jan-2022 - 31-Jan-2023
- AFRC-CATP-05999 SPF Extend the toolkit offering
- Bucconi, Marco (Principal Investigator) Parameswaran, Elangovan (Co-investigator) Fyvie, David (Co-investigator) Edridge, Innes (Co-investigator) Liu, Jun (Co-investigator) Soundattikar, Yogesh (Co-investigator)
- Development of internal capabilities focuses on superplastic forming, targeting:
Reduction of alpha case formation during the process
Recovery of argon gas
Development of a hybrid SPF process - 25-Jan-2022 - 31-Jan-2023
- AFRC-CORE-1459 Preliminary Investigation of Tailored Blanks for Aerospace Applications
- Bucconi, Marco (Principal Investigator) Gonzalez, Diego (Co-investigator) Parameswaran, Elangovan (Co-investigator) Liu, Jun (Co-investigator)
- Demonstration of the fabrication process for lightweight aerospace components utilising tailored blanks. The viability of this approach was exhibited for both aluminium parts via stretch-forming and titanium parts through superplastic forming. This was achieved through a combination of finite element modelling and practical experimentation.
- 11-Jan-2019 - 26-Jan-2022
- AFRC CORD 1425 - Track cans method of manufacture
- Bucconi, Marco (Principal Investigator) Parameswaran, Elangovan (Co-investigator)
- Evaluation of various manufacturing techniques and subsequent identification of the most suitable approach for producing an airfract track can
- 14-Jan-2019 - 06-Jan-2020
- AFRC-CRAD-1302 Carruthers Wheel: Very Low Head Hydro-Electricity
- Sancho, Alexander (Co-investigator) Parameswaran, Elangovan (Principal Investigator) Elsayed, Ahmed (Co-investigator) Marini, Daniele (Co-investigator)
- The design of a new waterwheel to be used for power generation in developing countries was developed. Computational Fluid Dynamics (CFD) models of the waterwheel were created and used to investigate its operating principle. The models were also used to validate experimental measurements taken from a prototype of the wheel. It was observed that the efficiency of the proposed system is significantly higher than that of more traditional designs.
- 18-Jan-2019 - 18-Jan-2020
Back to staff profile
Contact
Mr
Elangovan
Parameswaran
Hot Sheet Forming Theme Lead
Advanced Forming Research Centre
Email: elangovan.parameswaran@strath.ac.uk
Tel: 534 5621