Save this page
Save this page

My Saved Pages

  • Saved page.

My Saved Courses

  • Saved page.
Reset

Recently visited

  • Saved page.

Dr Andrzej Rosochowski

Reader

Design, Manufacture and Engineering Management

Publications

The influence of the microstructure morphology of two phase Ti-6Al-4V alloy on the mechanical properties of diffusion bonded joints
Yakushina E., Reshetov A., Semenova I., Polyakova V., Rosochowski A., Valiev R.
Materials Science and Engineering A Vol 726, pp. 251-258, (2018)
http://dx.doi.org/10.1016/j.msea.2018.04.052
Implementing an on-line bond quality inspection system for cold roll bonded Al/Al-Sn/Al/steel strips using guided wave EMATs
Tallafuss Philipp J, Rosochowski Andrzej, Campbell Sylvia, Minguez Xavier
Insight - Non-Destructive Testing & Condition Monitoring Vol 60, (2018)
Influence of incremental ECAP on the microstructure and tensile behaviour of commercial purity titanium
Qarni Muhammad Jawad, Rosochowski Andrzej, Boczkal Sonia
Procedia Engineering Vol 207, pp. 1481–1486, (2017)
http://dx.doi.org/10.1016/j.proeng.2017.10.917
New method of producing tailored blanks with constant thickness
Rosochowski Andrzej, Olejnik Lech
Procedia Engineering Vol 207, pp. 1433-1438, (2017)
http://dx.doi.org/10.1016/j.proeng.2017.10.909
Shear forming of 304L stainless steel – microstructural aspects
Guillot M., McCormack T., Tuffs M., Rosochowski A., Halliday S., Blackwell P.
Procedia Engineering Vol 207, pp. 1719–1724, (2017)
http://dx.doi.org/10.1016/j.proeng.2017.10.928
Ultrafine grained plates of Al-Mg-Si alloy obtained by Incremental Equal Channel Angular Pressing : microstructure and mechanical properties
Lipinska Marta, Chrominski Witold, Olejnik Lech, Golinski Jacek, Rosochowski Andrzej, Lewandowska Malgorzata
Metallurgical and Materials Transactions A Vol 48, pp. 4871–4882, (2017)
http://dx.doi.org/10.1007/s11661-017-4258-8

more publications

Professional activities

12th International Conference on Technology of Plasticity, ICTP 2017
Participant
2016
19th International ESAFORM Conference on Material Forming – ESAFORM 2016
Participant
8/2015
Slovak Research and Development Agency (External organisation)
Member
3/2015
2nd International Conference on Non-Ferrous Metals, ICNFM 2015
Member of programme committee
2015
Advanced Engineering Materials (Journal)
Peer reviewer
10/2014
Ultrasonics (Journal)
Peer reviewer
9/2014

more professional activities

Projects

Doctoral Training Partnership (DTP - University of Strathclyde) | Roszak, Jacob
Rosochowski, Andrzej (Principal Investigator) Rosochowska, Malgorzata (Co-investigator) Roszak, Jacob (Research Co-investigator)
Period 01-Oct-2015 - 01-Oct-2019
Strengthening of cold roll bonded Al/Al-Sn/Al/steel strips for engine bearings
Rosochowski, Andrzej (Principal Investigator)
Period 01-Nov-2017 - 28-Feb-2018
An EPSRC Life Sciences Interface Doctoral Training Centre for Medical Devices | Salamati, Mohammad Reza
Rosochowski, Andrzej (Principal Investigator) Black, Richard (Co-investigator) Salamati, Mohammad Reza (Research Co-investigator)
Period 01-Oct-2009 - 01-Oct-2014
Medical Devices Doctoral Training Centre Renewal | Salamati, Mohammad Reza
Rosochowski, Andrzej (Principal Investigator) Black, Richard (Co-investigator) Salamati, Mohammad Reza (Research Co-investigator)
Period 01-Oct-2009 - 01-Oct-2014
INDUSTRIAL DOCTORATE CENTRE IN ADVANCED FORMING AND MANUFACTURE | Fabris, Mathieu
Rosochowski, Andrzej (Principal Investigator) Rahimi, Salaheddin (Co-investigator) Fabris, Mathieu (Research Co-investigator)
Period 01-Oct-2014 - 01-Oct-2018
INDUSTRIAL DOCTORATE CENTRE IN ADVANCED FORMING AND MANUFACTURE | Ntovas, Michail
Blackwell, Paul (Principal Investigator) Rosochowski, Andrzej (Co-investigator) Ntovas, Michail (Research Co-investigator)
Period 01-Oct-2013 - 01-Oct-2017

more projects

Address

Design, Manufacture and Engineering Management
James Weir Building

Location Map

View University of Strathclyde in a larger map