
Mr John Storr
Senior Manufacturing Engineer
Advanced Forming Research Centre
Back to staff profile
Publications
- AFRC_TRP794_DIRF922 - D4.1 Low Cost Superplastic Forming Press Design Final Report V1.0
- Knowles Craig, Storr John, Jump Ellen, Gonzalez Diego
- (2019)
- Feasibility study of complex sheet hydroforming process : experimental and modelling
- Mohamed Mohamed, Carty David, Storr John, Zuelli Nicola, Blackwell Paul, Savings David
- Key Engineering Materials Vol 716, pp. 685-691 (2016)
- https://doi.org/10.4028/www.scientific.net/KEM.716.685
- AFRC_421_DIRF216 - D3 (Final Report) AFRC-EXP0057 – AFRC DIRF 216 BOEING HOT FORMING PRESS DESIGN – D3 FINAL REPORT
- Knowles Craig, Storr John, Jump Ellen
- (2016)
- Assessing the potential benefits of manufacturing gas turbine components by utilizing hydroforming technology
- Bell Colin, Corney Jonathan, Storr John
- 13th International Cold Forming Congress 13th International Cold Forming Congress, pp. 46-53 (2015)
Back to staff profile
Projects
- AFRC-CRAD-1130 Advanced Forming Technologies for Complex Shapes Spacecraft and Satellite Propellant Tanks
- Sancho, Alexander (Co-investigator) Storr, John (Co-investigator) Miscandlon, Jill (Co-investigator)
- Various manufacturing methods and materials were explored for the production of satellite propellant tanks for the European Space Agency (ESA). The aim was to identify and prove a manufacturing process which is more efficient than the current one. The AFRC contributed by studying and testing alternative forming processes. TWI was also part of the consortium and investigated potential welding methods.
- 01-Jan-2019 - 31-Jan-2019
- AFRC-DIRF-1040 Capability to Hot Form OGV Flat-pack Specimens with Increased Ramp-Angles
- Sancho, Alexander (Co-investigator) Storr, John (Principal Investigator)
- The forming cycle of a particular component was investigated through experimental forming trials, with the aim of optimizing the manufacturing process.
- 12-Jan-2018 - 19-Jan-2019
Back to staff profile
Contact
Mr
John
Storr
Senior Manufacturing Engineer
Advanced Forming Research Centre
Email: john.storr@strath.ac.uk
Tel: 534 5559