Professor Alexander Galloway

Deputy Associate Principal

Mechanical and Aerospace Engineering

Publications

Refill friction stir spot welding of AlSi10Mg alloy produced by laser powder bed fusion to wrought AA7075-T6 alloy
Fritsche S, Draper J, Toumpis A, Galloway A, Amancio-Filho ST
Manufacturing Letters Vol 34, pp. 78-81 (2022)
https://doi.org/10.1016/j.mfglet.2022.09.010
Influence of aluminium alloy grade on dissimilar friction stir welding of aluminium to AZ31B
Karrar Gihad, Galloway Alexander, Toumpis Athanasios, Li Hongjun
Joint International Symposium on Friction Stir Welding and Processing (2022)
Optimisation of friction stir welding parameters using the Taguchi technique for dissimilar joining of AA5083 to copper
Karrar Gihad, Galloway Alexander, Toumpis Athanasios, Li Hongjun
Joint International Symposium on Friction Stir Welding and Processing (2022)
Prediction and validation of intermetallic compound formation during friction stir welding of AA6061 to commercially pure copper
Karrar Gihad, Galloway Alexander, Toumpis Athanasios, Al-Badour Fadi, Li Hongjun
Science and Technology of Welding and Joining Vol 27, pp. 374-387 (2022)
https://doi.org/10.1080/13621718.2022.2055289
The influence of tempering and annealing on the microstructure and sliding wear response of G350 grey cast iron
Woodward Ronnie G, Toumpis Athanasios, Galloway Alexander
Wear Vol 496-497 (2022)
https://doi.org/10.1016/j.wear.2022.204283
Electrochemical evaluation of the effect of different NaCl concentrations on low alloy- and stainless steels under corrosion and erosion-corrosion conditions
Brownlie Frazer, Hodgkiess Trevor, Pearson Alastair, Galloway Alexander
Corrosion and Materials Degradation Vol 3, pp. 101-126 (2022)
https://doi.org/10.3390/cmd3010006

More publications

Professional activities

Faculty Robotics and Automation Users Group Discussion
Participant
10/10/2017

More professional activities

Projects

Development of wire arc additive manufacturing process for oil and gas components
Sillars, Fiona (Principal Investigator) Marrocco, Tiziana (Principal Investigator) Galloway, Alexander (Principal Investigator)
04-Jan-2019 - 03-Jan-2020
Optimisation of additive manufactured oil and gas components - Phase 1
Galloway, Alexander (Principal Investigator)
04-Jan-2018 - 31-Jan-2020
Materials for Precision Pumps Phase 1 (OGIC)
Galloway, Alexander (Principal Investigator)
22-Jan-2018 - 31-Jan-2019
Identify alternative materials for quiet radial piston pump
Sillars, Fiona (Principal Investigator) Marrocco, Tiziana (Principal Investigator) Galloway, Alexander (Principal Investigator)
06-Jan-2018 - 31-Jan-2019
Root cause failure of quiet radial piston pump
Sillars, Fiona (Principal Investigator) Marrocco, Tiziana (Principal Investigator) Galloway, Alexander (Principal Investigator)
03-Jan-2017 - 02-Jan-2017
APESA (H2020 MSCA EID)
MacKenzie, Donald (Principal Investigator) Comlekci, Tugrul (Co-investigator) Dempster, William (Co-investigator) Galloway, Alexander (Co-investigator) Stack, Margaret (Co-investigator) Stickland, Matthew (Co-investigator) Thomason, James (Co-investigator)
01-Jan-2015 - 31-Jan-2019

More projects

Address

Mechanical and Aerospace Engineering
James Weir

Location Map

View University of Strathclyde in a larger map