Dr Saeed Tamimi
Senior Technologist
Advanced Forming Research Centre
Back to staff profile
Prize And Awards
- In-kind value of time awarded at the ISIS Neutron & Muon Source – REF2021
- Recipient
- 17/10/2018
Back to staff profile
Publications
- AFRC-PRS03231-CORE07363-D2.1 Summary Presentation Describing The Outcome of Post-Forming / In-Service Material Properties Analysis of Al MMC
- Jadhav Sandip, Tamimi Saeed, Elsayed Ahmed
- (2026)
- Inter-pass peening for residual stress control in additive manufacturing : validation using ultrasonic, X-ray and contour method
- Walker Joseph, Mills Brandon, Javadi Yashar, MacLeod Charles, Sun Yongle, Ahmad Bilal, Williams Stewart, Ding Jialuo, Tamimi Saeed
- Materials & Design Vol 260 (2025)
- https://doi.org/10.1016/j.matdes.2025.115247
- Additive manufacturing innovations : microstructure optimisation for ultra-high silicon electrical steel components
- Karami Rasoul, Butler David, Javadi Yashar, Tamimi Saeed
- Materials Characterization Vol 224 (2025)
- https://doi.org/10.1016/j.matchar.2025.115002
- Manufacturing of non-grain-oriented electrical steels : review
- Karami Rasoul, Butler David, Tamimi Saeed
- The International Journal of Advanced Manufacturing Technology Vol 133, pp. 1083-1109 (2024)
- https://doi.org/10.1007/s00170-024-13837-9
- Enhancing additive friction stir deposition through comprehensive ultrasonic defect detection and process optimisation
- Germano Elmergue, Walker Joseph, Mills Brandon, Javadi Yashar, Buffa Gianluca, MacLeod Charles, Gachagan Anthony, Pierce Gareth, Mineo Carmelo, Tamimi Saeed, Mohseni Ehsan, Lam Kwok Ho
- The UKRI EPSRC Centre for Doctoral Training in Future Ultrasonic Engineering Annual Scientific Meeting 2024 (2024)
- Enhancing additive friction stir deposition through comprehensive ultrasonic defect detection and process optimisation
- Germano Elmergue, Walker Joseph, Mills Brandon, Javadi Yashar, Buffa Gianluca, MacLeod Charles Norman, Gachagan Anthony, Pierce Gareth, Mineo Carmelo, Tamimi Saeed, Mohseni Ehsan, Lam Kwok Ho
- UK & Ireland IEEE Ultrasonics, Ferroelectrics and Frequency Control Chapter (2024)
Back to staff profile
Projects
- Phased‑Array LCR Morphology Indicators Supported by Grain‑Size Measurement for Microstructure Characterisation
- Javadi, Yashar (Principal Investigator) Tamimi, Saeed (Co-investigator)
- 01-Jan-2026 - 31-Jan-2027
- AFRC-CORE-07363 Forming of Metallic Sheet for Lightweight App
- Jadhav, Sandip (Co-investigator) Carty, David (Principal Investigator) Liu, Jun (Principal Investigator) Tamimi, Saeed (Principal Investigator) Elrakayby, Hosam (Principal Investigator)
- 01-Jan-2025 - 30-Jan-2026
- Comparative Analysis of Residual Stresses in Aluminum Components Produced by Wire Arc Additive Manufacturing (WAAM) and AdditiveFriction Stir Deposition (AFSD)
- Javadi, Yashar (Principal Investigator) MacLeod, Charles Norman (Co-investigator) Buffa, Gianluca (Co-investigator) Tamimi, Saeed (Co-investigator) Rahimi, Salaheddin (Co-investigator) Paradowska, Anna (Co-investigator) Alipooramirabad, Houman (Co-investigator)
- This collaborative study between ANSTO, University of Palermo, University of Strathclyde, and AFRC investigates residual stresses in aluminum components produced via WAAM and AFSD (including MELD). Using neutron diffraction and ultrasonic techniques, the project aims to characterize and compare stress profiles across processes. The findings will inform process optimization and contribute to a doctoral thesis on in-situ stress measurement in metal additive manufacturing.
- 10-Jan-2025 - 09-Jan-2026
- DTP 2224 University of Strathclyde | Azam, Shahzaib
- Konkova, Tatyana (Principal Investigator) Tamimi, Saeed (Co-investigator) Azam, Shahzaib (Research Co-investigator)
- 01-Jan-2024 - 01-Jan-2028
- AFRC_CORE_ 6018 Forgeability and Microstructure Evolution of Ti Alloys
- Sivaswamy, Giribaskar (Research Co-investigator) Tamimi, Saeed (Research Co-investigator) Souza, Paul (Research Co-investigator)
- 01-Jan-2023 - 31-Jan-2024
- Optimising the microstructure and mechanical properties of Titanium Alloys developed for aero engines and landing gears
- Sivaswamy, Giribaskar (Principal Investigator) Bylya, Olga (Researcher) Reshetov, Aleksey (Researcher) Tamimi, Saeed (Researcher) Platts, Andrew (Researcher)
- This project was part of the Core program, which is funded by CATAPULT jointly with AFRC Tier1 members.
In this project, efforts are made to identify processing window for manufacturing defect free components out of near-α (Ti-6242) and α+β (Ti-407, Ti-412, Ti-6246) alloys through hot forging route. - 22-Jan-2023 - 15-Jan-2024
Back to staff profile
Contact
Dr
Saeed
Tamimi
Senior Technologist
Advanced Forming Research Centre
Email: saeed.tamimi@strath.ac.uk
Tel: 534 5571